R211x-HP Flexfabric 11900 FCoE Command Reference

99
NPV commands
display npv login
Use display npv login to display the nodes on downlink interfaces of an NPV switch and their mapped
uplink interfaces.
Syntax
display npv login [ vsan vsan-id ] [ interface interface-type interface-number ]
display npv login [ vsan vsan-id ] count
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays information for all VSANs on an NPV switch.
interface interface-type interface-number: Specifies a downlink interface by its type and number. If no
downlink interface is specified, this command displays information for all downlink interfaces on an NPV
switch.
count: Displays the total number of logged-in nodes on an NPV switch.
Usage guidelines
This command is available only when the switch is operating in NPV mode.
Examples
# Display the nodes on downlink interfaces and their mapped uplink interfaces on an NPV switch.
<Sysname> display npv login
Server External
Interface VSAN FCID Port WWN Node WWN Interface
Vfc1 1 0xae0002 20:00:00:23:89:c9:fc:05 20:00:00:23:89:c9:fc:05 Vfc3
Vfc2 1 0xae0003 10:00:00:00:c9:66:6b:60 20:00:00:00:c9:66:6b:60 Vfc3
# Display the number of logged-in nodes for VSAN 1.
<Sysname> display npv login vsan 1 count
Total entries: 2
# Display the total number of logged-in nodes for all VSANs.
<Sysname> display npv login count
VSAN Entries
1 2