R211x-HP Flexfabric 11900 FCoE Command Reference

100
2 1
Total entries: 3
Table 31 Command output
Field Descri
p
tion
Server Interface
Name of the downlink interface.
External interface Name of the uplink interface mapped by the downlink interface.
FCID FC address of the node.
Port WWN Port WWN of the node connected to the NPV switch.
Total entries Total number of logged-in nodes.
display npv status
Use display npv status to display the status of the NPV switch.
Syntax
display npv status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays the status of the switch in all VSANs.
Usage guidelines
This command is available only when the switch is operating in NPV mode.
You can use this command to display the status of each interface in VSANs, including VSAN tagging
mode, interface state, and FC address.
Examples
# Display the status of the NPV switch in VSAN 1.
<Sysname> display npv status vsan 1
External Interfaces:
Interface: Vfc2 VSAN tagging mode: Tagging
VSAN State FCID
1 Up 0x010002
Interface: Vfc3 VSAN tagging mode: Non tagging
VSAN State FCID