R211x-HP Flexfabric 11900 FCoE Command Reference

104
Parameters
server-interface interface-type interface-number: Specifies a downlink interface by its type and number,
which can only be a VFC interface.
external-interface interface-type interface-number: Specifies an uplink interface by its type and number,
which can only be a VFC interface.
Usage guidelines
This command is available only when the switch is operating in NPV mode.
When uplink-to-downlink interface mappings are configured for a downlink interface, the downlink
interface can select an uplink interface to map from only the uplink interfaces mapped to the downlink
interface. If no uplink-to-downlink interface mapping is configured for the downlink interface, it can select
an uplink interface to map from all uplink interfaces in the same VSAN.
Examples
# Configure a mapping between VFC 1 (downlink interface) and VFC 2 (uplink interface).
<Sysname> system-view
[Sysname] vsan 10
[Sysname-vsan10] npv traffic-map server-interface vfc 1 external-interface vfc 2