R211x-HP Flexfabric 11900 FCoE Command Reference

8
• fcoe global fcf-priority
display interface vfc
Use display interface vfc to display VFC interface information.
Syntax
display interface [ vfc ] [ brief [ down ] ]
display interface [ vfc [ interface-number ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-number: Specifies a VFC interface by its number in the range of 1 to 1024.
brief: Displays summary information about interfaces. If this keyword is not specified, this command
displays detailed information about VFC interfaces.
down: Displays information about the interfaces in physically down state and the causes. If this keyword
is not specified, this command displays information about the interfaces in all states.
description: Displays all of the interface description. If this keyword is not specified, this command
displays only the first 27 characters of a description if the description contains more than 27 characters.
Usage guidelines
If you do not specify the vfc interface-number option, this command displays information about all
interfaces supported by the device.
If you specify the vfc keyword but not the interface-number argument, this command displays information
about all VFC interfaces.
Examples
# Display detailed information about interface VFC 1.
<Sysname> display interface vfc 1
Vfc1
Current state: UP
Line protocol state: UP
Description: Vfc1 Interface
Bandwidth: 0kbps
Maximum Transmit Unit: 2112
Internet protocol processing: disabled
Link layer protocol is FC
Port WWN is 66:66:66:63:66:64:61:30
FC mode is E, state is E