R211x-HP Flexfabric 11900 FCoE Command Reference

9
Support the VSAN protocol
VSAN tagging mode is Tagging
EVFP common VSAN: 1
Bound interface is Ten-GigabitEthernet1/0/3, Bound MAC is 000c-2933-eacd
VSAN of physical-UP state: 1
Last clearing of counters: Never
Table 2 Command output
Field Descri
p
tion
Current state
Physical state and administrative state of the VFC interface:
• DOWN (Administratively)—The interface is administratively
shut down by using the shutdown command.
• DOWN—The interface is administratively up but physically
down.
• UP—The interface is up both administratively and physically.
Line protocol state Link layer protocol state of the VFC interface: DOWN or UP.
Bandwidth Expected bandwidth of the VFC interface.
Internet protocol processing
IP packet processing capability. If the VFC interface is not
configured with an IP address, this field displays disabled.
FC mode Mode of the VFC interface.
state Final mode through negotiation.
Support the VSAN protocol Indicates the VFC interface supports the VSAN protocol.
VSAN tagging mode
Link type of the interface: Trunk (Tagging) or Access (Non
tagging). VFC interfaces support only Tagging.
EVFP common VSAN
Indicates that the common VSANs are in up state through the
EVFP negotiation.
This field is displayed only after the link goes up.
Bound interface Physical interface bound to the VFC interface.
Bound MAC FCoE MAC address bound to the VFC interface.
VSAN of physical-UP state List of VSANs that are physically up.
Last clearing of counters
Time when the interface statistics were last cleared by using the
reset counters interface command. Never indicates that the
interface statistics have never been cleared since device startup.
# Display summary information about interface VFC 1.
<Sysname> display interface vfc 1 brief
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
Vfc1 UP -- --
# Display information about and the causes of the VFC interfaces in physically down state.
<Sysname> display interface vfc brief down
Brief information on interface(s) under bridge mode: