R211x-HP Flexfabric 11900 FCoE Command Reference

10
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Vfc1 ADM Administratively
Table 3 Command output
Field Descri
p
tion
Brief information on interface(s)
under bridge mode
Brief information about Layer 2 interfaces.
Link: ADM - administratively
down; Stby - standby
• ADM—The interface has been shut down by the network administrator.
To bring up the interface, execute the undo shutdown command.
• Stby—The interface is a standby interface.
Speed or Duplex: (a)/A - auto; H -
half; F - full
For speed:
(a)—The interface rate is determined by autonegotiation.
For duplex:
• (a)/A—The interface duplex mode is determined by autonegotiation.
• H—Half duplex.
• F—Full duplex.
Interface Interface name.
Link
Physical state of the interface:
• UP—The interface is physically up.
• DOWN—The interface is physically down.
• ADM—The interface has been administratively shut down. To bring up
the interface, execute the undo shutdown command.
• Stby—The interface is a standby interface.
Speed Interface rate in bps.
Duplex
Duplex mode of the interface:
• A—The duplex mode is determined by autonegotiation.
• F—Full duplex
• F(a)—Full duplex as the result of autonegotiation.
• H—Half duplex.
• H(a)—Half duplex as the result of autonegotiation.
Type
Link type of the interface:
• A—Access.
• H—Hybrid.
• T—Trunk.
PVID Port VLAN ID (PVID).
Description
Interface description configured by using the description command.
Without the description keyword, the display interface brief command
displays at most 27 characters of the description. With the description
keyword, this command displays all of the description.