R211x-HP Flexfabric 11900 FCoE Command Reference

19
FIP snooping commands
display fip-snooping enode
Use display fip-snooping enode to display ENode information obtained by a Transit switch.
Syntax
display fip-snooping enode [ vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays ENode information for all VLANs.
Examples
# Display ENode information obtained by a Transit switch.
<Sysname> display fip-snooping enode
VLAN 2:
Interface ENode WWN ENode MAC
XGE1/0/1 21:01:00:1b:32:a0:fa:18 000c-2999-eacd
Table 5 Command output
Field Descri
p
tion
Interface Ethernet interface connecting the Transit switch to the ENode.
ENode MAC FCoE MAC address of the ENode.
display fip-snooping fcf
Use display fip-snooping fcf to display FCF switch information obtained by a Transit switch.
Syntax
display fip-snooping fcf [ vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin