R211x-HP Flexfabric 11900 FCoE Command Reference

20
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays FCF switch information for all VLANs.
Examples
# Display FCF switch information obtained by a Transit switch.
<Sysname> display fip-snooping fcf
VLAN 3:
Interface FCF MAC FCF WWN Fabric Name ENode
XGE1/0/1 000c-2999-eacd 66:66:66:63:66:64:61:30 41:6e:64:69:61:6d:6f:21 1
XGE1/0/2 000c-2999-eaad 66:66:66:63:66:64:61:31 41:6e:64:69:61:6d:6f:22 2
Table 6 Command output
Field Descri
p
tion
Interface Ethernet interface connecting the Transit switch to the FCF switch.
FCF MAC FCoE MAC address of the FCF switch.
ENode Number of ENodes attached to an FCF switch.
display fip-snooping flushing-rules
Use display fip-snooping flushing-rules to display the FIP snooping rules that are being flushed.
Syntax
display fip-snooping flushing-rules [ enode | fcf ] [ vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
enode: Displays the ENode FIP snooping rules that are being flushed.
fcf: Displays the FCF FIP snooping rules that are being flushed.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays the FIP snooping rules that are being flushed for all VLANs.