R211x-HP Flexfabric 11900 FCoE Command Reference

23
Syntax
display fip-snooping sessions [ vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, this command
displays information about FIP snooping sessions for all VLANs.
Examples
# Display information about FIP snooping sessions.
<Sysname> display fip-snooping sessions
VLAN 2:
FCF MAC ENode MAC VN_Port MAC VN_Port WWN
0000-1234-0202 0000-1234-0100 0efc-00ae-0002 41:6e:64:69:61:6d:6f:21
Table 9 Command output
Field Descri
p
tion
FCF MAC FCoE MAC address of the FCF switch.
ENode MAC FCoE MAC address of the ENode.
VN_Port MAC MAC address of a VN port.
fip-snooping enable
Use fip-snooping enable to enable FIP snooping for a VLAN.
Use undo fip-snooping enable to restore the default.
Syntax
fip-snooping enable
undo fip-snooping enable
Default
FIP snooping is disabled.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin