R211x-HP Flexfabric 11900 FCoE Command Reference

25
Use undo fip-snooping port-mode to restore the default.
Syntax
fip-snooping port-mode { enode | fcf }
undo fip-snooping port-mode
Default
An Ethernet interface operates in ENode mode.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
enode: Specifies the ENode mode.
fcf: Specifies the FCF mode.
Usage guidelines
Ethernet interfaces on a Transit switch can operate in ENode mode or FCF mode. An Ethernet interface
connected to an ENode must be configured to operate in ENode mode. An Ethernet interface connected
to an FCF switch must be configured to operate in FCF mode.
Examples
# Configure interface Ten-GigabitEthernet 1/0/2 to operate in FCF mode.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/2
[Sysname-ten-gigabitethernet1/0/2] fip-snooping port-mode fcf