R211x-HP Flexfabric 11900 FCoE Command Reference

29
mdc-admin
mdc-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays the lists of domain IDs dynamically assigned in all VSANs.
Usage guidelines
For a dynamically built fabric, you can use this command to display the list of domain IDs dynamically
assigned in a specified VSAN, including the total number of domains and mappings between domain
IDs and switch WWNs.
Examples
# Display the list of domain IDs dynamically assigned in VSAN 1.
<Sysname> display fc domain-list vsan 1
Domain list of VSAN 1:
Number of domains: 3
Domain ID WWN
0xc8(200) 20:01:00:05:30:00:47:df [Principal]
0x63(99) 20:01:00:0d:ec:08:60:c1 [Local]
0x61(97) 50:00:53:0f:ff:f0:10:06
Table 11 Command output
Field Descri
p
tion
Domain list of VSAN Domain ID list of the VSAN.
Number of domains Total number of domains.
WWN
WWN of the switch. Principal indicates a principal switch, and Local
indicates a local switch.
Related commands
domain configure enable
display fc ess
Use display fc ess to display the Exchange Switch Support (ESS) negotiation result, including the
capabilities of the local switch and the capabilities of the remote switch after the ESS negotiation.
Syntax
display fc ess [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin