R211x-HP Flexfabric 11900 FCoE Command Reference

Field Descri

tion

Fabric Controller Capability List of fabric controller capabilities.

Support receiving the SW_RSCN Request

Indicates whether the switch supports accepting an SW_RSCN

(Registered State Change Notification) request (yes for supported

and no for not supported).

display fc login

Use display fc login to display the node login information of the specified VSANs.

Syntax

display fc login [ vsan vsan-id ] [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this

command displays the node login information of all VSANs.

count: Displays the total number of logged-in nodes.

Examples

# Display the node login information of VSAN 1.

<Sysname> display fc login vsan 1

Interface VSAN FCID Node WWN Port WWN

Vfc1 1 0x010000 21:01:00:1b:32:a0:fa:18 21:01:00:1b:32:a0:fa:17

# Display the number of logged-in nodes for VSAN 1.

<Sysname> display fc login vsan 1 count

Total entries: 1

# Display the total number of logged-in nodes for all VSANs.

<Sysname> display fc login count

VSAN Entries

1 1

2 1

Total entries: 2

Table 13 Command output

Field Descri

tion

Interface Interface on the switch connected to the node.