R211x-HP Flexfabric 11900 FCoE Command Reference

34
Field Descri
p
tion
Type
Port type registered by the node with the switch:
• 0x00(Unidentified)—No port type is registered.
• 0x01(N)—N_Port, which directly connects to the fabric.
• 0x02(NL)—NL_Port, which connects to the fabric through an
arbitrated loop.
• 0x03(F/NL)—F_Port or NL_Port.
• 0x7f(Nx)—N_Port, NL_Port, or F_Port or NL_Port.
• 0x81(F)—F_Port, which connects to an N_Port.
• 0x82(FL)—FL_Port, which connects to an NL_Port.
• 0x84(E)—E_Port, which connects to an E_Port or B_Port.
• 0x85(B)—B_Port. The ports on a bridge that connect two E_Ports
are called B_Ports.
• 0xXX(Unknown)—Port types other than the preceding ones.
NOTE:
Only N_Ports and NL_Ports will be registered by a node.
Port-WWN(vendor) WWN of the N_Port (name of vendor).
Node-WWN WWN of the node.
Class Class of service.
Node-IP-addr IP address of the node.
FC4-types(FC4 features)
FC4 type (feature) entries:
• FC4 type—Includes SCSI-FCP, LLC/SNAP, SW_ILS, SNMP, GS3,
VI, and NPV.
• Feature—Includes supporting Initiator, Target, or Initiator/Target.
Symbolic-port-name Symbolic name, which is used for describing the N_Port.
Symbolic-node-name Symbolic name, which is used for describing the node.
Port-type Link type of the N_Port, which can be N representing point-to-point.
Fabric-port-WWN WWN of the F_Port.
Hard-addr Hardware address of the N_Port.
Total entries Number of entries in the VSAN.
display fc scr-table
Use display fc scr-table to display the State Change Registration (SCR) list of N_Ports.
Syntax
display fc scr-table [ vsan vsan-id ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator