R211x-HP Flexfabric 11900 FCoE Command Reference

36
mdc-operator
Parameters
distributed-services: Displays the distributed service timeout period, in milliseconds.
error-detect: Displays the error detection timeout period, in milliseconds.
resource-allocation: Displays the resource allocation timeout period, in milliseconds.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays global fabric timer information.
Usage guidelines
If you do not specify the distributed-services, error-detect, or resource-allocation keyword, this
command displays all the fabric timers.
Examples
# Display all the fabric timers for VSAN 1.
<Sysname> display fc timer vsan 1
Timer of VSAN 1:
Distributed-services timer: 5000 ms
Error-detect timer: 2000 ms
Resource-allocation timer: 10000 ms
domain auto-reconfigure enable
Use domain auto-reconfigure enable to enable the auto fabric reconfiguration function for the switch in
a specified VSAN.
Use undo domain auto-reconfigure enable to restore the default.
Syntax
domain auto-reconfigure enable
undo domain auto-reconfigure enable
Default
The auto fabric reconfiguration function is disabled in each VSAN.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command is available only when the fabric configuration function is enabled.
The fabric reconfiguration triggers principal switch selection, domain ID assignment, and FC address
assignment throughout the fabric.
Auto fabric reconfiguration occurs in the event of network faults or fabric merges as follows:
• When two fabrics are merged:
{ The switches automatically perform a disruptive reconfiguration if the domain ID lists overlap.