R211x-HP Flexfabric 11900 FCoE Command Reference

37
{ The system automatically performs a non-disruptive reconfiguration if the principal switch
information of the two fabrics is different and the domain ID lists are not empty or overlapping.
• When the principal switch in a fabric is down, the system automatically performs a non-disruptive
reconfiguration.
Examples
# Enable the auto fabric reconfiguration function for the switch in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] domain auto-reconfigure enable
Related commands
domain configure enable
domain configure enable
Use domain configure enable to enable the fabric configuration function for the switch in a specified
VSAN.
Use undo domain configure enable to disable the fabric configuration function for the switch in a
specified VSAN.
Syntax
domain configure enable
undo domain configure enable
Default
The fabric configuration function is enabled in each VSAN.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After being enabled with the fabric configuration function, FCF switches exchange messages to select the
principal switch. Then, the principal switch dynamically assigns domain IDs to all switches in the fabric.
To dynamically build a fabric, you must enable the fabric configuration function on switches. To statically
set up a fabric, you must disable the fabric configuration function on switches and manually configure
domain IDs for the switches.
Examples
# Enable the fabric configuration function for the switch in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] domain configure enable