R211x-HP Flexfabric 11900 FCoE Command Reference

43
Default
The global error detection timeout period is 2000 milliseconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Specifies the error detection timeout period in the range of 1000 to 10000 milliseconds.
Usage guidelines
The error detection timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the error detection timeout period globally and for the specified VSAN at the same
time, the configuration for the VSAN is given priority.
Examples
# Set the global error detection timeout period to 6000 milliseconds.
<Sysname> system-view
[Sysname] fc timer error-detect 6000
Related commands
timer error-detect
fc timer resource-allocation
Use fc timer resource-allocation to specify the resource allocation timeout period globally.
Use undo fc timer resource-allocation to restore the default.
Syntax
fc timer resource-allocation value
undo fc timer resource-allocation
Default
The global resource allocation timeout period is 10000 milliseconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Specifies the resource allocation timeout period in the range of 5000 to 10000 milliseconds.