R211x-HP Flexfabric 11900 FCoE Command Reference

44
Usage guidelines
The resource allocation timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the resource allocation timeout period globally and for the specified VSAN at the
same time, the configuration for the VSAN is given priority.
Examples
# Set the global resource allocation timeout period to 6000 milliseconds.
<Sysname> system-view
[Sysname] fc timer resource-allocation 6000
Related commands
timer resource-allocation
fc wwn default-fc4-type
Use fc wwn default-fc4-type to configure the default FC4 information for a node.
Use undo fc wwn default-fc4-type to delete the default FC4 information of a node.
Syntax
fc wwn wwn-value default-fc4-type { type-value feature feature-map | scsi-fcp feature { feature-map |
both | initiator | target } }
undo fc wwn wwn-value default-fc4-type { type-value | scsi-fcp }
Default
No default FC4 information is configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
wwn-value: Specifies an N_Port by its WWN in the format of xx:xx:xx:xx:xx:xx:xx:xx (hexadecimal).
type-value: Specifies a supported FC4-Type by its value in the range of 0 to 255. The FC4-Type field is
256 bits, each of which represents an FC4-Type. If a bit is set to 1, the FC4-Type that the bit represents
is supported. Only one bit can be set to 1 at the same time.
scsi-fcp: Specifies the supported FC4-Type as SCSI-FCP, which has a type-value of 8.
feature feature-map: Specifies the Feature value for the supported FC4-Type. The value range for
feature-map is 0 to 15. The Feature field is 4 bits, each of which represents a Feature. If a bit is set to 1,
the Feature that the bit represents is supported. More than one bit can be set to 1 at the same time. For
example, if the value is set to 15, the node supports four features of the FC4-Type. If the value is set to 0,
the node supports none of the four features. When you specify supported FC4-Type as SCSI-FCP, you can
configure the following keywords:
• initiator: Specifies support for the initiator feature, which has a feature-map of 2.