R211x-HP Flexfabric 11900 FCoE Command Reference

48
Usage guidelines
The distributed service timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the distributed service timeout period globally and for the specified VSAN at the
same time, the configuration for the VSAN is given priority.
Examples
# Set the distributed service timeout period to 6000 milliseconds for VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] timer distributed-services 6000
Related commands
fc timer distributed-services
timer error-detect
Use timer error-detect to specify the error detection timeout period for a specified VSAN.
Use undo timer error-detect to restore the default.
Syntax
timer error-detect value
undo timer error-detect
Default
The error detection timeout period is 2000 milliseconds.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Specifies the error detection timeout period in the range of 1000 to 10000 milliseconds.
Usage guidelines
The error detection timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the error detection timeout period globally and for the specified VSAN at the same
time, the configuration for the VSAN is given priority.
Examples
# Set the error detection timeout period to 6000 milliseconds for VSAN 1.
<Sysname> system-view
[Sysname] vsan 1