R211x-HP Flexfabric 11900 FCoE Command Reference

50
Syntax
wwn wwn-value area-port-id area-port-id-value
undo wwn wwn-value area-port-id
Default
No binding is configured.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
wwn-value: Specifies the WWN of the N_Port, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x is a
hexadecimal number.
area-port-id-value: Specifies the Area_ID and Port_ID in the format of xxxx, where x is a hexadecimal
number. The first two digits indicate the Area_ID, and the last two digits indicate the Port_ID.
Usage guidelines
If you bind the WWN of an N_Port to an FC address, when the N_Port requests an FC address, the
switch assigns the bound FC address to it. However, if the N_Port has been assigned another FC address
or the FC address has been assigned to another N_Port, the binding is not allowed.
The N-Port here indicates an N_Port on a node or an NP_Port on an NPV switch.
The WWN of an N_Port can be bound to only one FC address, and vice versa.
Examples
# In VSAN 1, bind the N_Port (whose WWN is 33:e8:00:05:30:00:16:df) to an FC address whose
Area_ID is ab and Port_ID is 12.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] wwn 33:e8:00:05:30:00:16:df area-port-id ab12