R211x-HP Flexfabric 11900 FCoE Command Reference

1
FCoE commands
The switch supports FCoE only when operating in advanced mode. For more information about system
operating modes, see Fundamentals Configuration Guide.
FCoE mode commands
display fcoe-mode
Use display fcoe-mode to display the FCoE mode of a switch.
Syntax
display fcoe-mode
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the FCoE mode of the switch.
<Sysname> display fcoe-mode
The FCoE mode is FCF.
<Sysname> display fcoe-mode
The FCoE mode is NPV.
<Sysname> display fcoe-mode
The FCoE mode is TRANSIT.
<Sysname> display fcoe-mode
The FCoE mode is NONE.
Related commands
fcoe-mode
fcoe-mode
Use fcoe-mode to configure an FCoE mode for the switch.
Use undo fcoe-mode to restore the default.
Syntax
fcoe-mode { fcf | npv | transit }