R211x-HP Flexfabric 11900 FCoE Command Reference

Exchanges are divided into the following categories:

• Protocol exchange—Created only at the server end based on the protocol number and VSAN ID

and used for monitoring connection setup.

• Link exchange—Created at both ends based on the exchange ID and used for packet exchange.

Examples

# (In standalone mode.) Display the protocol exchange entries.

<Sysname> display fc exchange protocol slot 1

Local_ID:EXID Remote_ID:EXID State Slot Protocol

0x000000:65535 0x000000:65535 LISTEN 1 6

# (In IRF mode.) Display the protocol exchange entries.

<Sysname> display fc exchange protocol chassis 1 slot 2

Local_ID:EXID Remote_ID:EXID State Chassis Slot Protocol

0x000000:65535 0x000000:65535 LISTEN 1 2 13

# (In standalone mode.) Display the link exchange entries.

<Sysname> display fc exchange link slot 2

Local_ID:EXID Remote_ID:EXID State Slot Protocol

0x060501:1024 0x010001:1025 ESTABLISHED 2 8

# (In IRF mode.) Display the link exchange entries.

<Sysname> display fc exchange link chassis 3 slot 5

Local_ID:EXID Remote_ID:EXID State Chassis Slot Protocol

0x060501:1024 0x010001:1025 ESTABLISHED 3 5 11

# Display detailed information about the link exchange entries.

<Sysname> display fc exchange link verbose slot 1

slot: 1

protocol: 8

connection info: Local = 0x090801:1155 , Remote = 0x050001:1089

PCB flags: 0x2

FC Class: FC_CLASS_F

connection state: ESTABLISHED

VSAN ID: 25

Table 17 Command output

Field Descri

tion

Local_ID:EXID/Local

FC address and exchange ID of the local end

This field is ignored for a protocol exchange.

Remote_ID:EXID/Remote

FC address and exchange ID of the peer end.

This field is ignored for a protocol exchange.