R211x-HP Flexfabric 11900 FCoE Command Reference

66
Field Descri
p
tion
Timer mismatch
Number of packets whose hello or dead interval does not match that of the
neighbor.
Bad LSR Number of error LSRs.
Neighbor unknown Number of packets received from unknown neighbors.
Neighbor state low Number of LSUs and LSAs received in Init state.
Type Packet type: Hello, LSU, or LSA.
Input Number of packets received.
Output Number of packets sent.
Related commands
reset fspf counters
fc route-static
Use fc route-static to configure a static FC route.
Use undo fc route-static to delete a static FC route.
Syntax
fc route-static fcid { mask | mask-length } interface-type interface-number [ cost cost-value ]
undo fc route-static fcid { mask | mask-length } interface-type interface-number
Default
No static FC route exists.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
fcid: Specifies the destination FC address of the static FC route, in the range of 0x010000 to 0xFFFFFF
(hexadecimal).
mask: Specifies a hexadecimal mask of the FC address. This argument is used together with the fcid
argument. The value of this argument can be 0xFF0000, 0xFFFF00, or 0xFFFFFF.
mask-length: Specifies a decimal mask of the FC address. This argument is used together with the fcid
argument. The value of this argument can be 8, 16, or 24.
interface-type interface-number: Specifies the outgoing interface of the static FC route, which must be an
existing VFC interface on the FCF switch.
cost cost-value: Specifies the cost of the route, in the range of 0 to 65535 and defaulting to 0.