R211x-HP Flexfabric 11900 FCoE Command Reference

72
Usage guidelines
The hello interval specifies the time between the hello packets sent periodically by the switch to discover
and maintain neighbor relationships.
The configured hello interval must be smaller than the dead interval and must be the same at the two
ends of the link.
Examples
# Configure the hello interval for interface VFC 1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fspf hello-interval 10 vsan 4
Related commands
fspf dead-interval
fspf min-ls-arrival
Use fspf min-ls-arrival to configure the minimum LSR receiving interval for a specified VSAN.
Use undo fspf min-ls-arrival to restore the default.
Syntax
fspf min-ls-arrival value
undo fspf min-ls-arrival
Default
The default setting is 1 second.
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Specifies the minimum LSR receiving interval in the range of 0 to 60 seconds.
Usage guidelines
The minimum LSR receiving interval specifies the time between receiving LSRs in a VSAN. Any LSR
instances of the same LSR received within this time are dropped. This helps avoid frequent SPF
calculations caused by LSDB updating.
Examples
# Configure the minimum LSR receiving interval as 10 seconds for VSAN 2.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] fspf min-ls-arrival 10