R211x-HP Flexfabric 11900 FCoE Command Reference

4
VFC interface and FIP commands
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) is the interface baud rate divided by 1000.
Views
VFC interface view
Predefined user roles
network-admin
mdc-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of a VFC interface affects routing by affecting the link costs in FSPF. By default,
a VFC interface uses 10 Gbps for link cost calculation in FSPF.
Examples
# Set the expected bandwidth of VFC interface 1 to 50 kbps.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] bandwidth 50
bind interface
Use bind interface to bind a VFC interface to an Ethernet interface.
Use undo bind interface to remove the binding.
Syntax
bind interface interface-type interface-number [ mac mac-address ]
undo bind interface
Default
A VFC interface is not bound to any Ethernet interface.