R211x-HP Flexfabric 11900 FCoE Command Reference

85
mdc-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays information about active zone sets in all VSANs.
Usage guidelines
A VSAN can have only one active zone set.
The following rules apply to the command output:
• For an existing zone member, which can be queried from the local name service database, this
command prefixes an asterisk (*) to the related line. If a pWWN is configured for the zone member,
the device queries its associated FC address from the name service database and displays it, and
appends the pWWN enclosed in brackets ([]) to the FC address.
• For a zone member that does not exist in the local name service database, only the configuration
content is displayed.
• Zone members cannot be displayed by zone alias in the active zone set. If a zone in the activated
zone set has members with a zone alias, the non-overlapping N_Port members in the zone alias are
directly added to the zone.
• If members of the default zone are allowed to access each other, this command displays valid
members in the default zone by FC address (members registered with the name service database
and not part of the active zone set).
Examples
# Display information about the active zone sets in all VSANs.
<Sysname> display zoneset active
VSAN 1:
zoneset name zs1
zone name z1
*fcid 0x111111 [pwwn 11:11:11:11:11:11:11:11]
*fcid 0x222222
zone name z2
*fcid 0x111111 [pwwn 11:11:11:11:11:11:11:11]
*fcid 0x333333 [pwwn 33:33:33:33:33:33:33:33]
fcid 0x123456
pwwn 11:11:11:11:11:11:11:12
VSAN 2:
VSAN 3:
zoneset name zs1
zone name z1
*fcid 0x111111 [pwwn 11:11:11:11:11:11:11:11]
*fcid 0x333333 [pwwn 33:33:33:33:33:33:33:33]
fcid 0x123456
pwwn 11:11:11:11:11:11:11:12
# Display information about the active zone set in VSAN 1.
<Sysname> display zoneset active vsan 1
VSAN 1:
zoneset name zs1
zone name z1