R211x-HP Flexfabric 11900 FCoE Command Reference

89
[Sysname] zoneset name zs1
[Sysname-vsan1-zoneset-zs1]
# Add zone z1 to zone set zs1.
[Sysname-vsan1-zoneset-zs1] member z1
Related commands
• display zoneset
• zone name
• zoneset name
zone clone
Use zone clone to copy a zone.
Syntax
zone clone src-name dest-name
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
src-name: Specifies the name of the source zone to be copied, a case-sensitive string of 1 to 64
characters. A source zone name can contain English letters (uppercase and lowercase), numbers, and
special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an
English letter.
dest-name: Specifies the name of the destination zone, a case-sensitive string of 1 to 64 characters. A
destination zone name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
Examples
# Create zone z1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1] quit
# Create zone z2 by copying z1.
[Sysname-vsan1] zone clone z1 z2
Related commands
• display zone
• zone name