R211x-HP Flexfabric 11900 FCoE Command Reference

94
Related commands
• display zone-alias
• zone-alias name
zoneset activate
Use zoneset activate to activate a specified zone set as the active zone set and distribute it to the entire
fabric.
Use undo zoneset activate to delete an active zone set and distribute the deletion to the entire fabric.
Syntax
zoneset activate name zoneset-name
undo zoneset activate
Views
VSAN view
Predefined user roles
network-admin
mdc-admin
Parameters
name zoneset-name: Specifies the zone set to be activated by its name, a case-sensitive string of 1 to 64
characters. This name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
Usage guidelines
Each VSAN can have multiple zone sets, but only one zone set can be effective at a time. It is called the
"active zone set." The active zone set must consist of at least one N_Port member and determines access
control over N_Ports.
You must use this command to explicitly activate a zone set as the active zone set and distribute it to the
entire fabric.
When distributing the active zone set to the entire fabric, the device determines whether to carry zone
database information according to the distribution type specified by the zoneset distribute full
command.
Examples
# Create zone z1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
# Add an N_Port with the FC address as 010000 to zone z1.
[Sysname-vsan1-zone-z1] member fcid 010000
[Sysname-vsan1-zone-z1] quit
# Create zone set zs1.
[Sysname-vsan1] zoneset name zs1