R211x-HP Flexfabric 11900 FCoE Configuration Guide

90
Ste
p
Command
1. Enter system view.
system-view
2. Enter VSAN view.
vsan vsan-id
3. Activate a complete distribution.
zoneset distribute
Renaming zone aliases, zones, and zone sets
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSAN view.
vsan vsan-id N/A
3. Rename a zone alias.
zone-alias rename old-name
new-name
The zone alias to be renamed must
have been created, and the new
zone alias must not have been
created.
4. Rename a zone.
zone rename old-name new-name
The zone to be renamed must have
been created, and the new zone
must not have been created.
5. Rename a zone set.
zoneset rename old-name new-name
The zone set to be renamed must
have been created, and the new
zone set must not have been
created.
Copying zone aliases, zones, and zone sets
You can create a zone alias, zone, or zone set by copying an existing one. The source and the
destination have the same contents but different names.
To copy a zone alias, zone, and zone set:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSAN view.
vsan vsan-id N/A
3. Copy an existing zone
alias to create a new zone
alias.
zone-alias clone src-name dest-name
The source zone alias must have
been created, and the destination
zone alias must not have been
created.
4. Copy an existing zone to
create a new zone.
zone clone src-name dest-name
The source zone must have been
created, and the destination zone
must not have been created.
5. Copy an existing zone set
to create a new zone set.
zoneset clone src-name dest-name
The source zone set must have
been created, and the destination
zone set must not have been
created.