R211x-HP Flexfabric 11900 Fundamentals Command Reference

147
---- More ----
Related commands
• reset saved-configuration
• save
display startup
Use display startup to display the current startup configuration file and the next-startup configuration
files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
Current startup configuration file is the configuration file that has been loaded. Next-startup
configuration file is the configuration file used at the next startup.
In standalone mode:
The standby MPU always uses the same current startup configuration file as the active MPU. After an
active/standby switchover, it is normal that the current startup configuration files on them are displayed
as NULL, because the new active MPU continues to run with the running configuration rather than
rebooting with the previous current startup configuration file.
In IRF mode:
The MPUs in the IRF fabric always use the same current startup configuration file as the global active MPU.
After an active/standby switchover, it is normal that the current startup configuration files on them are
displayed as NULL, because the new global active MPU continues to run with the running configuration
rather than rebooting with the previous current startup configuration file.
Examples
# In standalone mode, display startup configuration files.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Slot 5:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL