R211x-HP Flexfabric 11900 Fundamentals Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP FlexFabric 11000 Switch Products

151

152

153

154

155

156

157

158

159

160

150

Predefined user roles

network-admin

mdc-admin

Parameters

backup: Deletes the backup next-startup configuration file.

main: Deletes the main next-startup configuration file.

Usage guidelines

CAUTION:

Use this command with caution. In standalone mode, this command permanently deletes the next-startup

configuration files from both MPUs. In IRF mode, this command permanently deletes the next-startup

configuration files on all MPUs in the IRF fabric.

Delete a next-startup configuration file if it is corrupted or does not match the software version.

You can delete the main, the backup, or both.

To delete a file that is set as both main and backup next-startup configuration files, you must execute both

the reset saved-configuration backup command and the reset saved-configuration main command.

Using only one of the commands removes the specified file attribute instead of deleting the file.

For example, if the reset saved-configuration backup command is executed, the backup next-startup

configuration file setting is set to NULL, but the file is still used as the main file. To delete the file, you must

also execute the reset saved-configuration main command.

If no configuration file attribute is specified, the reset saved-configuration command deletes the main

next-startup configuration file.

Examples

# In standalone mode, delete the main next-startup configuration file.

<Sysname> reset saved-configuration

The saved configuration file will be erased. Are you sure? [Y/N]:y

Configuration file in flash is being cleared.

Please wait ...

MainBoard:

Configuration file is cleared.

Slot 5:

Erase next configuration file successfully

# In IRF mode, delete the backup next-startup configuration file.

<Sysname> reset saved-configuration backup