R211x-HP Flexfabric 11900 Fundamentals Command Reference

159
# In IRF mode, specify flash:/all.ipe as the backup startup image file for the MPU in slot 4 on IRF member
device 1.
<Sysname> boot-loader file flash:/all.ipe chassis 1 slot 4 backup
Verifying image file......Done.
Images in IPE:
boot.bin
system.bin
ssh.bin
This command will set the backup startup software images. Continue? [Y/N]:Y
Add images to target slot.
flash:/boot.bin already exists on chassis 1 slot 4.
flash:/system.bin already exists on chassis 1 slot 4.
flash:/ssh.bin already exists on chassis 1 slot 4.
Overwrite it? [Y/N]:y
Decompressing file boot.bin to flash:/boot.bin....................................Done.
Decompressing file system.bin to flash:/system.bin................................Done.
The images that have passed all examinations will be used as the backup startup software
images at the next reboot on chassis 1 slot 4.
Related commands
display boot-loader
boot-loader update
In standalone mode:
Use boot-loader update to synchronize startup images from the active MPU to the standby MPU.
In IRF mode:
Use boot-loader update to synchronize startup images from the global active MPU to a standby MPU.
Syntax
In standalone mode:
boot-loader update slot slot-number
In IRF mode:
boot-loader update chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the slot number of the standby MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a standby MPU of the global active MPU. The
chassis-number argument represents the IRF member ID of the device that holds the standby MPU. The
slot-number argument represents the slot number of the standby MPU. (In IRF mode.)