R211x-HP Flexfabric 11900 Fundamentals Command Reference

171
chassis chassis-number slot slot-number: Specifies a card on an IRF member. If you do not specify this
option, the command is applied to all cards in the IRF fabric. (In IRF mode.)
verbose: Displays detailed information. If you do not specify this keyword, the command displays only
the names of the software images.
Usage guidelines
ISSU can change only main startup software images. To change backup startup software images, you
must use the boot-loader file command.
For more information about main and backup startup software images, see Fundamental Configuration
Guide.
Examples
# In standalone mode, display the backup startup software images.
<Sysname> display install backup
Backup startup software images on slot 5:
flash:/boot-R2110.bin
flash:/system-R2110.bin
# In IRF mode, display the backup startup software images.
<Sysname> display install backup
Backup startup software images on chassis 1 slot 5:
flash:/boot-R2110.bin
flash:/system-R2110.bin
# Display detailed information about backup startup software images.
<Sysname> display install backup verbose
Backup boot packages information on slot 5:
flash:/boot-R2110.bin
[Package]
Vendor: HP
Product: xxxx
Service name: boot
Platform version: 7.1.045
Product version: Release 2110
Supported board: mpu lpu
Version type: debug
[Component]
Component: boot
Description: boot package
flash:/system-R2110.bin
[Package]
Vendor: HP
Product: xxxx
Service name: system
Platform version: 7.1.045
Product version: Release 2110
Supported board: mpu lpu
Version type: debug
[Component]