R211x-HP Flexfabric 11900 Fundamentals Command Reference

11
[Sysname] quit
<Sysname>
return
Use return to return to user view from any other view.
Syntax
return
Views
Any view except user view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
Pressing Ctrl+Z has the same effect as the return command.
Examples
# Return to user view from Ten-GigabitEthernet 1/0/1 interface view.
[Sysname-Ten-GigabitEthernet1/0/1] return
<Sysname>
screen-length disable
Use screen-length disable to disable pausing between screens of output for the current session.
Use undo screen-length disable to enable pausing between screens of output for the current session.
Syntax
screen-length disable
undo screen-length disable
Default
The default depends on the configuration of the screen-length command in user line view.
The following are default settings for the screen-length command:
• Pausing between screens of output.
• Displaying up to 24 lines on a screen.
Views
User view
Predefined user roles
network-admin
mdc-admin