R211x-HP Flexfabric 11900 Fundamentals Command Reference

195
Usage guidelines
For an incremental upgrade, the install activate command changes only the current software
configuration. To keep the changes after a reboot, you must use the install commit command to confirm
the software changes.
For a reboot or ISSU reboot upgrade, the install activate command changes both the current software
configuration and the main startup software images. You do not need to use the install commit command
to confirm the software changes.
The install deactivate and install rollback commands change only the current software configuration. To
keep the changes after a reboot, you must use the install commit command to confirm the software
changes.
When you execute the install commit command, the system refreshes the main startup software image set
to use the currently active software images as the main startup software images for the next reboot. The
boot-loader file command can also change the main startup software image set. The differences
between these two commands are that the boot-loader file command can change the backup startup
software image set as well and can add inactive software images to the image sets.
For more information about main and backup startup software images and image sets, see Fundamental
Configuration Guide.
Examples
# Confirm the software changes.
<Sysname> install commit
Related commands
• install activate
• install deactivate
• install rollback
install deactivate
Use install deactivate to deactivate feature images and patch images.
Syntax
In standalone mode:
install deactivate feature filename&<1-30> slot slot-number
install deactivate patch filename slot slot-number
In IRF mode:
install deactivate feature filename&<1-30> chassis chassis-number slot slot-number
install deactivate patch filename chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
filename: Specifies the name of a software image file in the root directory of the active MPU's Flash, in