R211x-HP Flexfabric 11900 Fundamentals Command Reference

200
slot 5:
Start to check active package completeness.
flash:/boot-r2110.bin verification successful.
flash:/system-r2110.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.
Verification is done.
issu accept
Use issu accept to accept the upgrade to a compatible version and delete the automatic-rollback timer.
Syntax
issu accept
Views
User view
Predefined user roles
network-admin
Usage guidelines
If you execute this command for an ISSU to an incompatible version, an error message appears.
After you execute this command, the automatic-rollback timer is removed and the system does not
perform automatic rollback for the ISSU process anymore. However, you can use the issu rollback
command to manually roll back to the original software configuration.
This command is optional. You can execute the issu commit command to finish the ISSU process without
executing this command.
Examples
# Accept the upgrade to a compatible version.
<Sysname> issu accept
Related commands
• issu load
• issu run switchover
issu commit
In standalone mode:
• For a dual-MPU device, use issu commit to upgrade the original active MPU during an ISSU to a
compatible version.
• For a single-MPU device, use issu commit to finish an ISSU to a compatible version.
In IRF mode:
• For a dual-MPU single-chassis IRF fabric, use issu commit to upgrade the original global active MPU
during an ISSU to a compatible version.