R211x-HP Flexfabric 11900 Fundamentals Command Reference

234
Examples
# In standalone mode, display device information.
<Sysname> display device
Slot No. Brd Type Brd Status Subslot Sft Ver Patch Ver
0 NONE Absent 0 NONE None
1 LSU1TGS32SF9 Normal 0 11900-2111 None
2 LSU1TGS32SF9 Normal 0 11900-2111 None
3 LSU1TGS32SF9 Normal 0 11900-2111 None
4 NONE Absent 0 NONE None
5 LSU1SUPB9 Master 0 11900-2111 None
6 NONE Normal 0
NONE None
7 NONE Absent 0 NONE None
8 NONE Absent 0 NONE None
9 NONE Absent 0 NONE None
10 LSU1FAB08D9 Normal 0 11900-2111 None
11 NONE Absent 0 NONE None
12 NONE Absent 0 NONE None
13 NONE Absent 0 NONE None
The output shows that the device has one MPU (in slot 5), three interface cards (in slots 1, 2, and 3), and
one switching fabric module (in slot 10).
Table 30 Command output
Field Descri
p
tion
Slot No. Slot number of the card.
Brd Type Hardware type of the card.
Brd Status
Card status:
• Standby—The card is the standby MPU.
• Master—The card is the active MPU.
• Absent—The slot is not installed with a card.
• Fault—The card is faulty and cannot start up.
• Normal—The card is an interface card and is operating correctly.
Subslot Maximum number of subcards that the card supports. The switch does not support subcards.
Sft Ver Software version of the card.
Patch Ver Patch version of the card.
# In IRF mode, display device information about all IRF member devices.
<Sysname> display device
Chassis Slot. Type State Subslot Soft Ver Patch Ver
1 0 NONE Absent 0 NONE None
1 1 LSU1TGS32SF9 Normal 0 11900-2111 None
1 2 LSU1TGS32SF9 Normal 0 11900-2111 None
1 3 LSU1TGS32SF9 Normal 0 11900-2111 None
1 4 NONE Absent 0 NONE None
1 5 LSU1SUPB9 Master 0 11900-2111 None
1 6 LSU1TGS32SF9 Normal 0 11900-2111 None
1 7 NONE Absent 0 NONE None