R211x-HP Flexfabric 11900 Fundamentals Command Reference

17
[Y/N]:y
[Sysname-line-vty0]
# To verify the configuration, Telnet to 192.168.1.40.
The device automatically Telnets to 192.168.1.41, and the following output is displayed:
C:\> telnet 192.168.1.40
******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname>
Trying 192.168.1.41 ...
Press CTRL+K to abort
Connected to 192.168.1.41 ...
******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname.41>
This operation is the same as directly logging in to the device at 192.168.1.41 through Telnet. When you
break the Telnet connection to 192.168.1.41, the Telnet connection to 192.168.1.40 is broken at the same
time.
command accounting
Use command accounting to enable command accounting.
Use undo command accounting to restore the default.
Syntax
command accounting
undo command accounting
Default
Command accounting is disabled, and the accounting server does not record executed commands.
Views
User line view, user line class view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
When command accounting is enabled but command authorization is not, every executed command is
recorded on the HWTACACS server.