R211x-HP Flexfabric 11900 Fundamentals Command Reference

257
Field Descri
p
tion
Bias(mA) Bias current in mA, accurate to 0.01 mA.
RX power(dBm) RX power in dBm, accurate to 0.01 dBm.
TX power(dBm) TX power in dBm, accurate to 0.01 dBm.
display transceiver interface
Use display transceiver interface to display the key parameters of transceiver modules.
Syntax
display transceiver interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. Without this option, the
command displays the key parameters of every transceiver module.
Examples
# Display the key parameters of the transceiver module in interface Ten-GigabitEthernet 1/0/1.
<Sysname> display transceiver interface ten-gigabitethernet 1/0/1
Ten-GigabitEthernet1/0/1 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : HP
Ordering Name : JD118B
Table 40 Command output
Field Descri
p
tion
transceiver information Transceiver information.
Transceiver Type Transceiver type.
Connector Type
Connector type options:
• MPO—Multi-fiber Push On
• LC—1.25 mm/RJ-45 fiber connector developed by Lucent.
• RJ-45.