R211x-HP Flexfabric 11900 Fundamentals Command Reference

258
Field Descri
p
tion
Wavelength(nm)
• Fiber transceiver: Central wavelength (in nm) of the transmit laser. If the
transceiver supports multiple wavelengths, every two wavelength values are
separated by a comma.
• Copper cable: Displayed as N/A.
Transfer Distance(xx)
Transfer distance, with "xx" representing the distance unit: km (kilometers) for
single-mode transceiver modules and m (meters) for other transceiver modules.
If the transceiver module supports multiple transfer media, the transfer distances are
separated by commas. The transfer medium is included in the bracket following the
transfer distance value. The following are the transfer media:
• 9 um—9/125 um single-mode fiber.
• 50 um—50/125 um multi-mode fiber.
• 62.5 um—62.5/125 um multi-mode fiber.
• TP—Twisted pair.
Digital Diagnostic
Monitoring
Support for the digital diagnosis function:
• YES—Supported.
• NO—Not supported.
Ordering Name Product code.
display transceiver manuinfo
Use display transceiver manuinfo to display the electronic label information of transceiver modules.
Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the electronic label information of the transceiver modules on all
interfaces.
Usage guidelines
This command displays only part of the electronic label information.
Examples
# Display the electronic label information of the transceiver module in interface Ten-GigabitEthernet
1/0/1.
<Sysname> display transceiver manuinfo interface ten-gigabitethernet 1/0/1