R211x-HP Flexfabric 11900 Fundamentals Command Reference

261
Default
An LPU performs load sharing by ingress interface.
Views
System view
Predefined user roles
network-admin
Parameters
destination-ip: Performs load sharing by destination IP address.
destination-mac: Performs load sharing by destination MAC address.
ingress-port: Performs load sharing by ingress interface.
source-ip: Performs load sharing by source IP address.
source-mac: Performs load sharing by source MAC address.
flexible: Performs load sharing by packet type (for example, Layer 2, IPv4, IPv6, MPLS).
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. (In IRF mode.)
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
If the device does not support the specified load sharing mode, an error message is displayed.
Examples
# Configure the card in slot 2 to perform load sharing by both source IP address and destination IP
address.
<Sysname> system-view
[Sysname] fabric load-sharing mode source-ip destination-ip slot 2
header
Use header to create a banner.
Use undo header to clear a banner.
Syntax
header { incoming | legal | login | motd | shell } text
undo header { incoming | legal | login | motd | shell }
Default
The default settings depend on the device model.
Views
System view
Predefined user roles
network-admin
mdc-admin