R211x-HP Flexfabric 11900 Fundamentals Command Reference

268
If password recovery capability is enabled, a console user can access the device configuration without
authentication to configure new passwords.
If password recovery capability is disabled, console users must restore the factory-default configuration
before they can configure new passwords. Restoring the factory-default configuration deletes the
next-startup configuration files.
To enhance system security, disable password recovery capability.
Availability of BootWare menu options varies with the password recovery capability setting. For more
information, see the release notes.
Examples
# Disable password recovery capability.
<Sysname> system-view
[Sysname] undo password-recovery enable
reboot
Use reboot to reboot a card, a subcard, or the entire system. (In standalone mode.)
Use reboot to reboot an IRF member device, a subcard, or all IRF member devices. (In IRF mode.)
Syntax
In standalone mode:
reboot [ slot slot-number ] [ force ]
In IRF mode:
reboot [ chassis chassis-number [ slot slot-number ] ] [ force ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. (In IRF mode.)
slot slot-number: Specifies a card by its slot number.
force: Reboots the device immediately without performing any software check. If this keyword is not
specified, the system identifies, for example, whether the main system software image file exists and
whether the hard disk is not being written. If any circumstance might affect data protection, the system
does not reboot the device.