R211x-HP Flexfabric 11900 Fundamentals Command Reference

270
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing any software check.
<Sysname> reboot force
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2.
<Sysname> reboot slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2 by force.
<Sysname> reboot slot 2 force
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2.
<Sysname> reboot chassis 2
This command will reboot the specified chassis, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2 by force.
<Sysname> reboot chassis 2 force
This command will reboot the specified chassis, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2.
<Sysname> reboot chassis 2 slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2 by force.
<Sysname> reboot chassis 2 slot 2 force
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
reset asset-info
Use reset asset-info to clear the asset profile of a physical component, such as, the chassis, a card, a fan
tray, or a power supply.
Syntax
In standalone mode:
reset asset-info { chassis | fan fan-id | power power-id | slot slot-number } [ csn | custom | department
| description | location | service-date | state ]
In IRF mode:
reset asset-info chassis chassis-number { chassis | fan fan-id | power power-id | slot slot-number } [ csn
| custom| department | description | location | service-date | state ]
Views
System view