R211x-HP Flexfabric 11900 Fundamentals Command Reference

20
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
number1: Specifies the absolute number of a user line. The value range is 0 to 65 in standalone mode
and 0 to 71 in IRF mode.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value ranges are as follows:
• AUX line—0 to 1 in standalone mode and 0 to 7 in IRF mode.
• VTY line—0 to 63.
summary: Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Examples
# Display user line information.
<Sysname> display line 1
Idx Type Tx/Rx Modem Auth Int
F 1 AUX 1 9600 - N -
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 1 Command output
Field Description
Modem
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
(-) is displayed.
# In IRF mode, display summary information about all user lines.
<Sysname> display line summary
Line type : [AUX]
0:XUXX XXXX
Line type : [VTY]
8:UXXX XXXX XXXX XXXX
24:XXXX XXXX XXXX XXXX