R211x-HP Flexfabric 11900 Fundamentals Command Reference

275
• If the reboot time is earlier than the current time, a reboot occurs at the reboot time the next day.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot delay
and schedule reboot delay commands or configure one of the commands multiple times, the most recent
configuration takes effect.
Examples
# Configure the device to reboot at 12:00 p.m. This example assumes that the current time is 11: 43 a. m .
on June 6, 2013.
<Sysname> scheduler reboot at 12:00
Reboot system at 12:00:00 06/06/2013 (in 0 hours and 16 minutes). Confirm? [Y/N]:
Related commands
scheduler reboot delay
scheduler reboot delay
Use scheduler reboot delay to specify the reboot delay time.
Use undo scheduler reboot to remove the reboot schedule configuration.
Syntax
scheduler reboot delay time
undo scheduler reboot
Default
No reboot delay time is specified.
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies the reboot delay time in the format hh:mm or mm. This argument can consist up to 6
characters. When in the format hh:mm, mm must be in the range of 0 to 59.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot delay
and schedule reboot delay commands or configure one of the commands multiple times, the most recent
configuration takes effect.