R211x-HP Flexfabric 11900 Fundamentals Command Reference

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

number1: Specifies the absolute number of a user line. The value range is 0 to 65 in standalone mode

and 0 to 71 in IRF mode.

aux: Specifies the AUX line.

vty: Specifies the VTY line.

number2: Specifies the relative number of a user line. The value ranges are as follows:

• AUX line—0 to 1 in standalone mode and 0 to 7 in IRF mode.

• VTY line—0 to 63.

summary: Displays summary information about user lines. If you do not specify this keyword, the

detailed information is displayed.

Usage guidelines

This is an older command reserved for backward compatibility purposes. Although it has the same

functionality and output as the display line command, HP recommends that you use the display line

command.

Examples

# Display user line information.

<Sysname> display user-interface 1

Idx Type Tx/Rx Modem Auth Int

1 AUX 1 9600 - N -

+ : Line is active.

F : Line is active and in async mode.

Idx : Absolute index of line.

Type : Type and relative index of line.

Auth : Login authentication mode.

Int : Physical port of the line.

A : Authentication use AAA.

N : No authentication is required.

P : Password authentication

Table 3 Command output

Field Description

Modem

Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen

(-) is displayed.