R211x-HP Flexfabric 11900 Fundamentals Command Reference

294
mdc-admin
mdc-operator
Parameters
name mdc-name: Specifies an MDC by its name, a case-insensitive string of 1 to 15 characters. If you do
not specify this option, the command displays all MDCs.
Examples
# Display all MDCs.
<Sysname> display mdc
ID Name Status
---------------------------------
1 Admin active
2 sub1 inactive
Table 45 Command output
Field Descri
p
tion
Status
Status of the MDC:
• inactive—The MDC is stopped or not started yet.
• starting—The device is executing the mdc start command to start the MDC.
• active—The MDC is operating correctly.
• updating—The device is executing the location command to authorize the MDC to
use an interface card.
• stopping—The device is executing the undo mdc start command to stop the MDC.
Related commands
mdc
display mdc interface
Use display mdc interface to display the interfaces of MDCs.
Syntax
display mdc [ name mdc-name ] interface
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name mdc-name: Specifies an MDC by its name, a case-insensitive string of 1 to 15 characters. If you do
not specify this option, the command displays the interfaces of all MDCs.