R211x-HP Flexfabric 11900 Fundamentals Command Reference

31
last-number2: Specifies the relative number of the last user line. This number cannot be smaller than
first-number2.
Usage guidelines
To configure settings for a single user line, use this command to enter the user line view.
To configure the same settings for multiple user lines, use this command to enter multiple user line views.
Examples
# Enter the view of user line AUX 1.
<Sysname> system-view
[Sysname] line aux 1
[Sysname-line-aux1]
# Enter the views of user lines VTY 0 to VTY 4.
<Sysname> system-view
[Sysname] line vty 0 4
[Sysname-line-vty0-4]
Related commands
line class
line class
Use line class to enter user line class view.
Syntax
line class { aux | vty }
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
aux: Specifies the AUX line class view.
vty: Specifies the VTY line class view.
Usage guidelines
To configure the same settings for all user lines of a line class, use this command to enter the user line
class view.
Some login management commands are available in both user line view and user line class view:
• A setting in user line view is applied only to the user line. A setting in user line class view is applied
to all user lines of the class.
• A non-default setting in either view takes precedence over a default setting in the other view. A
non-default setting in user line view takes precedence over a non-default setting in user line class
view.