R211x-HP Flexfabric 11900 Fundamentals Command Reference

46
This command is not effective for existing Telnet connections.
If you execute this command multiple times, the most recent configuration takes effect.
For more information about ACL, see ACL and QoS Configuration Guide.
Examples
# Permit only the user at 2000::1 to Telnet to the device.
<Sysname> system-view
[Sysname] acl ipv6 number 2001
[Sysname-acl6-basic-2001] rule permit source 2000::1 128
[Sysname-acl6-basic-2001] quit
[Sysname] telnet server ipv6 acl ipv6 2001
telnet server ipv6 dscp
Use telnet server ipv6 dscp to set the DSCP value for IPv6 to use for outgoing Telnet packets on a Telnet
server.
Use undo telnet server ipv6 dscp to restore the default.
Syntax
telnet server ipv6 dscp dscp-value
undo telnet server ipv6 dscp
Default
IPv6 uses the DSCP value 48 for outgoing Telnet packets on a Telnet server.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
This command is not supported in FIPS mode.
The DSCP value is carried in the Traffic class field of an IPv6 packet, and it indicates the transmission
priority of the packet.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server ipv6 dscp 30
terminal type
Use terminal type to specify the terminal display type.