R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

115
Figure 38 Network diagram
Configuration procedure
# Configure IP addresses and routes to make sure the device and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on both the device and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
# Use TFTP to download the image file 11900.ipe from the TFTP server to the root directory of the flash on
the global active MPU.
<Sysname> tftp 2.2.2.2 get 11900.ipe
# (Optional.) Back up the image file to 11900-backup.ipe on the global active MPU. Skip this step if the
flash does not have sufficient space.
<Sysname> copy 11900.ipe 11900-backup.ipe
# Specify 11900.ipe as the main startup image file for all MPUs.
<Sysname> boot-loader file flash:/11900.ipe chassis 1 slot 4 main
<Sysname> boot-loader file flash:/11900.ipe chassis 1 slot 5 main
<Sysname> boot-loader file flash:/11900.ipe chassis 2 slot 4 main
<Sysname> boot-loader file flash:/11900.ipe chassis 2 slot 5 main
# Specify 11900-backup.ipe as the backup startup image file for all MPUs.
<Sysname> boot-loader file flash:/11900-backup.ipe chassis 1 slot 4 backup
<Sysname> boot-loader file flash:/11900-backup.ipe chassis 1 slot 5 backup
<Sysname> boot-loader file flash:/11900-backup.ipe chassis 2 slot 4 backup
<Sysname> boot-loader file flash:/11900-backup.ipe chassis 2 slot 5 backup
# Verify the startup image settings.
<Sysname> display boot-loader
# Reboot the IRF fabric to complete the upgrade.
<Sysname> reboot
# Verify that the IRF fabric is running the correct software.
<Sysname> display version
TFTP server
2.2.2.2/24
Internet
IRF
1.1.1.1/24
IRF link
Master
(Member ID = 1)
Subordinate
(Member ID = 2)