R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

132
<Sysname> issu commit slot 4
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version New Version
Release 2110 Release 2111
Slot Upgrade Way
4 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]: y
# Verify that both MPUs are running the new image.
<Sysname> display install active
Active packages on slot 4:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on slot 5:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Feature upgrade to an incompatible version
Upgrade requirement
As shown in Figure 40, the device has two MPUs: one in slot 4 (active MPU) and the other in slot 5
(standby MPU).
Upgrade the feature1 feature from R2110 to R2111. The two versions are ISSU-incompatible versions.
Figure 40 Network diagram
Upgrade procedure
# Download the upgrade image from the TFTP server.
<Sysname> tftp 2.2.2.2 get feature1-r2111.bin
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 256k 100 256k 0 0 764k 0 --:--:-- --:--:-- --:--:-- 810k
# Display active software images.
<Sysname> display install active
Active packages on slot 4:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2110.bin
Active packages on slot 5: